Soulmate Glassic 764 S-Glass Fly Rod Building Kit
The perfect glass rod for small waters and the art of presentation
Not every situation on the water calls for maximum distance. Often it is the precise casts under overhanging branches, a clean roll cast along the bank or an elegant single-hand spey cast that make the difference between success and failure.
The Soulmate Glassic 764 was developed precisely for these situations.
With its length of 7’6”, line weight #4 and its modern medium fast progressive S-glass action, it is the ideal choice for small to medium rivers and streams. It presents dry flies exceptionally delicately, allows light nymph fishing and impresses with casting performance you would hardly expect from a glass rod.
The Glassic 764 combines the unmistakable feel of a classic fiberglass rod with the precision of modern blank technology.
Modern S-glass technology – lively, precise and exceptionally versatile
The heart of the kit is the Soulmate Glassic S-glass blank.
Made of modern S-glass, the blank impresses with its high recovery speed, enormous strength and pleasantly low weight. Compared with classic fiberglass rods, the Glassic reacts much faster and more directly, without losing its characteristic smooth action.
The progressive medium-fast action loads the blank cleanly even with little line outside the rod tip and provides impressively precise line control.
The result:
- exceptionally delicate dry fly presentations
- perfect drift control when light nymphing
- the highest precision at short and medium distances
- tremendous line control on difficult casts
- a lively, direct feel when playing fish
- excellent tippet protection even with fine tippets
Overhead cast, roll cast or single-hand spey – the Glassic feels at home everywhere
The Soulmate Glassic 764 was developed for waters where classic overhead casts are often not possible at all.
Whether densely overgrown creeks, small rivers or overgrown banks – this is exactly where the Glassic shows its greatest strength.
The blank loads superbly even with little line, allowing:
- precise overhead casts
- powerful roll casts
- effortless single-hand spey casts
- snap T and switch-up casts in the tightest spaces
- exact presentations even under branches or along overhanging vegetation
Especially in difficult casting situations, the progressive glass action provides exceptional feedback and control. This makes almost every presentation clean, controlled and achievable with minimal effort.
The ideal rod for dry flies and light nymphing
The Glassic 764 feels at home wherever precision matters more than pure distance.
Delicate dry flies are presented gently and with control, without disturbing the water unnecessarily. At the same time, the blank has enough backbone to guide light nymph rigs safely and to play bigger trout with confidence.
Thanks to the progressive glass action, almost the entire blank works when playing fish. Head shakes are cleanly cushioned and fine tippets reliably protected.
It is precisely this harmonious fish-fighting behavior that makes modern glass rods so special.
Your own custom rod project
With the Soulmate rod building kit you don't simply get individual components, but a perfectly matched complete package for building your personal fiberglass fly rod.
The best fly rod building components available – carefully selected and perfectly matched.
We have already done much of the preparatory work, so you can focus entirely on the build itself.
No reaming. No drilling. No sanding.
Simply unpack, build step by step and create your very own Soulmate custom fly rod.
Everything included – ready to go
The kit contains all the components you need for the build:
- Soulmate Glassic S-glass blank
- premium cork grip
- high-quality reel seat
- complete guide set
- tip top
- winding check
- natural wrapping silk
- 30-minute epoxy glue
- high-quality 2-component rod finish
- mixing cups
- brush
- spatula
- stirring sticks
- burnishing tool
- masking tape
- Soulmate stickers and decals
- detailed build instructions via QR code
- rod tube and rod sock
Premium components from renowned manufacturers
For the Soulmate Glassic Rod Building Kit we use only carefully selected premium components from renowned manufacturers.
Depending on the version, hardware components from
- Snake Brand
- SeaGuide
are used.
Every single component has been perfectly matched to the blank. The result is a light, superbly balanced and durable fly rod that meets the highest standards both technically and visually.
Easy to build – lasting enjoyment
The premium cork grip is already precisely prepared, so reel seat and blank fit together perfectly without rework.
The detailed step-by-step instructions guide you safely through the entire build – whether you are building your first fly rod or already have rod building experience.
Should a spare part ever be needed later, we of course offer all matching components through our spare parts service.
Specifications
- Model: Soulmate Glassic 764
- Length: 7’6”
- Pieces: 4
- Line weight: #4
- Blank material: modern S-glass
- Action: medium fast progressive
- Finish: Clear Gloss
Why you will love the Soulmate Glassic 764 Rod Building Kit
✓ Modern S-glass with exceptional recovery speed
✓ Perfect for dry flies and light nymphing
✓ Outstanding presentation performance at short and medium distances
✓ Excellent overhead, roll and single-hand spey casting properties
✓ Harmonious fish-fighting behavior and optimal tippet protection
✓ Perfectly matched premium components
✓ Detailed build instructions included
✓ Personal support and spare parts service from MB-Customrods
The Soulmate Glassic 764 is more than a classic glass rod. It combines the soul of a traditional fiberglass rod with the precision of modern blank technology and delights wherever perfect presentations are called for. Whether a delicate dry fly, a light nymph or technically demanding casts in tight spaces – this rod makes every movement fluid, every presentation controlled and every fight an unforgettable experience.
Our Rod Building Kits
What's included in the kits?
What's included in the kits?
The Soulmate Fly Rod Building Kit contains all the essential components and materials for building your own fly rod:
- Soulmate fly rod blank
- Soulmate rod tube including rod sock
- Pre-formed premium cork grip, including fighting butt on selected models
- Matching reel seat
- Complete guide set with snake guides, stripping guide and winding check
- Adhesive kit with 30-minute epoxy for reel seat and grip, and adhesive for the tip-top
- FlexCoat rod finish in pre-filled syringes for coating the wraps
- Brush, mixing cups, spatulas and mixing sticks
- Masking tape for shimming and fitting components
- Wrapping thread and thread burnisher
- QR code for accessing assembly instructions
- Information on guide placement, decals and stickers
- Foldable rod holders for comfortable wrapping
Who are the kits suitable for?
Who are the kits suitable for?
The Soulmate Kits are ideal for fly fishermen who want to build their own high-quality rod and perfectly tailor it to their specific needs. Depending on the model, it is suitable for different fish species, water types, and techniques – from small streams to larger rivers or the coast. Thanks to carefully matched components, the kit is suitable for both ambitious beginners and experienced rod builders.
What else do I need?
What else do I need?
The kits contain all essential components and consumables for building your Soulmate fly rod. However, some additional tools and aids will make your work easier and ensure a particularly clean result.
Helpful Tools and Materials
- Good work light: Very important so that wraps, transitions, and any adhesive residue remain clearly visible.
- Stable workspace: Ideally, the assembly area can remain set up for the entire construction period.
- Sharp knife or scalpel: For precisely cutting thread ends.
- Lint-free cloths: For cleaning components and removing adhesive residue.
- Denatured alcohol: For degreasing and cleaning the blank, grip, and adhesive surfaces. Acetone should be used very carefully.
- Small scissors: Helpful for winding, positioning, and shortening the wrapping thread.
- Fly-tying bobbin: Recommended if you are working with the included rod stands.
- Fine sandpaper or steel wool: For carefully roughing up adhesive surfaces.
- Tape measure, pencil or China marker and masking tape: For guide spacing, markings, and protective lines.
Optional Extras
A rod dryer or slow-rotating motor is particularly helpful to ensure the epoxy finish remains evenly distributed during curing. Without continuous rotation, the finish can run or form drips.
The included wrapping thread can be used directly. Of course, you can also choose your own colors and customize your rod. Silk thread can appear transparent to translucent with proper processing, while nylon generally creates a stronger and more opaque color effect.
Difficulty, setup time, and service?
Difficulty, setup time, and service?
Difficulty
The Soulmate Fly Rod Building Kit is suitable for ambitious beginners as well as experienced rod builders. All essential components are coordinated, and the individual steps are clearly explained in the instructions. However, some manual skill, patience, and careful work are still important, especially when aligning the guides, wrapping the thread, and applying the finish.
Assembly Time
Depending on your experience, working method, and model, you should allow about two to three evenings for complete assembly. This does not include the respective drying and curing times for glue and rod finish. A calm assembly without time pressure ensures the cleanest result.
My Service Promise
Even after your purchase, I won't leave you alone with your project. If you have questions about individual steps, components, guide positions, or the application of glue and finish, you will receive personal support. My goal is for you to be able to build your Soulmate fly rod safely, cleanly, and with joy – from the first step to the finished rod.
Need a spare part?
Need a spare part?
No problem: For our Soulmate Fly Rod Building Kits, we offer all suitable spare parts for a small handling fee. You do not need to send in the rod for this.
Since all components are precisely matched, you will always receive the correct replacement part – quickly, easily, and without additional adjustment effort. This way, you can easily replace damaged or lost parts and continue building or repairing your rod right away.